Showing 1 - 20 of 56 , query time: 0.01s
Cover Image
Format:
Image
The New Jersey Zinc Company office in Gilman, Colorado. The cinder block portion, which was the newer portion of the office, was constructed in approximately 1953. [license plate 1953]
Cover Image
Format:
Image
Dick Sayers (left) and John Skinner adjusting controls at the pump station on 20 level at the mine in Gilman.
Cover Image
Format:
Image
Signal pulleys to let the hoistman, who operated the cage, know when to raise or lower the cage.
Cover Image
Format:
Image
Moving mining timber at the surface level near the main shaft at Gilman. Timber was stored outside until needed in the mine and loaded vertically into the main cage for unloading on 16 level.
Cover Image
Format:
Image
Air operated mucking machine. The scoop goes over the mucking machine and empties the ore into the car behind. Miners also used these cars to move mining timbers throughout the mine.
Cover Image
Format:
Image
Mucking machine picking up a load of ore at Gilman. The machine ran on rails and pulled ore cars behind for loading.
Cover Image
Format:
Image
Cable used to raise forge door.
Cover Image
Format:
Image
Inside the mill at the Gilman Mine. Chemicals are stored in pallets in the left forefront and a battery operated fork lift is parked in the center background. The soda ash mixing machine area is at the top of the platform. Soda ash (also called washing soda, sodium carbonate Na2CO3) was one of the chemicals used to clean the ore. The large pipe on the left is for ventilation of the soda ash work area.
Cover Image
Format:
Image
Staging area in the mill at Gilman for the chemicals used to process the mined ore. The fork lift was used to lift pallets of the chemicals for use in the mixing machines. [Similar to 2007.008.072]
Cover Image
Format:
Image
Part of the soda ash mixing machine at the Gilman Mine. Soda ash was used in processing the ore along with copper sulfate. An electric motor to power the mixer sets atop the mixing bucket.
Cover Image
Format:
Image
A mine conveyor used for transporting the zinc ore from level to level and to the crusher in the mine. Conveyors were used extensively in the mine. [related to photo 2007.008.067]
Cover Image
Format:
Image
Crane lifting transformers into place at Gilman.
Cover Image
Format:
Image
Crane at Gilman power plant moving transformers. The building in the left background housed the post office, mercantile, and grocery store.
Cover Image
Format:
Image
Transformers being lifted into place by a Weicker crane at Gilman. The main power line came over Turkey Creek (near Red Cliff) to Gilman.
Cover Image
Format:
Image
Weicker crane being "blocked" during transformer unloading operations at the Gilman power plant. Smiling onlookers at right.
Cover Image
Format:
Image
Electrical transformers, prior to unloading at Gilman, on a Weicker transfer and storage truck.
Cover Image
Format:
Image
Installing new transformers at Gilman. The tanks at the back of the unit are for cooling purposes.
Cover Image
Format:
Image
Transformers that were replaced being hauled by Weicker at Gilman.
Cover Image
Format:
Image
Mine stope showing the reinforcing timbers used. On the left side of the picture is a thermometer used to monitor temperatures.
Cover Image
Format:
Image
Platform leading to the soda ash machine at the Gilman Mine. Soda ash (also called washing soda, sodium carbonate Na2CO3) was one of the chemicals used to clean the ore. The large pipe on the left is for ventilation of the soda ash work area.