Mine equipment
Showing
21 - 40
of 93
, query time: 0.03s
Format:
Image
Ed Koch welding a repair on a "yellow car", a rocker dump car, which dumped ore to the side. The frame and wheels can be seen in the lower front foreground.
Format:
Image
At right is the ball mill. At left is the rod mill. The mills are on an incline for gravity feed down to the loading docks.
At the center right of the photo, steel rods are stacked for use in the rod mill.
23) Surface tram
Format:
Image
The surface tram from Belden to the top of the mine complex at Gilman during a tour of the Gilman mine. The Grass Mountain Nightrider Snowmobile Club organized the tour. Durbin McIlnay would have been mine superintendent at that time.
There are 28 photos in this series taken by Bob Riggle, the only color series of which I'm aware. Should you question the captions or have further information, please let us know.
Format:
Image
Dick Sayers (left) and John Skinner adjusting controls at the pump station on 20 level at the mine in Gilman.
26) Signal pulleys
Format:
Image
Signal pulleys to let the hoistman, who operated the cage, know when to raise or lower the cage.
27) Mucking machine
Format:
Image
Air operated mucking machine. The scoop goes over the mucking machine and empties the ore into the car behind. Miners also used these cars to move mining timbers throughout the mine.
28) Mucking machine
Format:
Image
Mucking machine picking up a load of ore at Gilman. The machine ran on rails and pulled ore cars behind for loading.
30) Derailment
Format:
Image
Rail cars knocked off the tracks in the winter, circa 1951-52 at Belden. Other cars are lined up in the background awating loading. The dryer is the large building behind the railroad cars.
Format:
Image
A surface tram used to move ore and equipment is on the left coming into Belden from Gilman at the top. Loading tippel, steam room and the dryer buildings are pictured in the lower right.
32) Soda ash machine
Format:
Image
Inside the mill at the Gilman Mine. Chemicals are stored in pallets in the left forefront and a battery operated fork lift is parked in the center background. The soda ash mixing machine
area is at the top of the platform. Soda ash (also called washing soda, sodium carbonate Na2CO3) was one of the chemicals used to clean the ore. The large pipe on the left is for ventilation of the soda ash work area.
Format:
Image
Staging area in the mill at Gilman for the chemicals used to process the mined ore. The fork lift was used to lift pallets of the chemicals for use in the mixing machines. [Similar to 2007.008.072]
Format:
Image
Part of the soda ash mixing machine at the Gilman Mine. Soda ash was used in processing the ore along with copper sulfate. An electric motor to power the mixer sets atop the mixing
bucket.
Format:
Image
A mine conveyor used for transporting the zinc ore from level to level and to the crusher in the mine. Conveyors were used extensively in the mine. [related to photo 2007.008.067]
Format:
Image
Bob Enzenroth repairing and overhauling a jackhammer. All rock drills not working properly were sent to the machine shop to be cleaned, repaired and returned to the mine for service.
37) Timber truck
Format:
Image
John Mignone (left) and Jesse Belt preparing a completely reconditioned timber truck for return to service in the mine. Sufficient timber and timber trucks were vital to the operation of the mine.
Format:
Image
Bill Burnett clamping 4" x 6" x 3/8" heavy angle iron and 1/2" plates into an exact postiton prior to welding. This will make a base for a battery charging generator in one of the mine charging stations.
39) Mine stope
Format:
Image
Mine stope showing the reinforcing timbers used. On the left side of the picture is a thermometer used to monitor temperatures.
40) Piping
Format:
Image
Underground pipes used to move water and chemicals for the ore milling processes. A group of fans is seen in the bottom background, providing some of the ventilation in the mine at Gilman.
