Showing 21 - 40 of 270 , query time: 0.01s
Cover Image
Format:
Image
From far left: Chuck Colby, Berniece Chadwick and Davy Burnett. Jean Flaherty is at far right.
Cover Image
Format:
Image
Art Anderson in his underground office at the Gilman Mine circa 1958. The large faced clock was typical of clocks found at Gilman.
Cover Image
23) Belden
Format:
Image
Facilities at Belden, some abandoned. Mine buildings are at right, midfield. The Eagle River is at the right and railroad tracks are at the bottom
Cover Image
Format:
Image
Storage shelves in the repair area.
Cover Image
Format:
Image
The loading tipple is at far left where products would be transferred to railroad cars for shipment. The "Bull Gang" managed loading and maintenance in the Eagle River canyon. Robert E. Riggle was Bull Gang chief at one point. The stairway at center goes into a mine entrance at about the 17 level. There are 80 feet between levels in the Gilman mine.
Cover Image
Format:
Image
Staff meeting at the Gilman Mine..(l to r) Frank Sherwood, Darrell Barnes, Bill Jude, Tony Karwacki, Harold Stienmier and Jim Brown. Bill Jude is at the head of the table with the other participants standing at their seats.
Cover Image
Format:
Image
All repairs to equipment were done in the mine's repair shop. In this photo there is milling machinery to work steel. A rack of steel bars is at far right.
Cover Image
Format:
Image
More equipment in the repair shop in Gilman.
Cover Image
Format:
Image
Battle Mountain as seen from Gilman. The numerous streaks near the mid point of the mountain mark mine openings above Belden. These represented small mining claims from the late 1800's. The photo is oriented east toward Red Cliff with Windy Point in the top center. U.S. Highway 24 is toward the top of Battle Mountain.
Cover Image
30) Gilman
Format:
Image
Looking down on Gilman housing; main shaft is on the middle left of the photo. A small section of U.S. Highway 24 can be seen at the upper left.
Cover Image
Format:
Image
Automobiles parked at Gilman along the main road into the town. Housing in left background. The building at the far right is the one-story part of the shaft house. Stacked mine timbers can barely be seen above the roofline. This appears to be taken prior to the bus line that ran from Minturn. Notch Mountain is visible at the upper left.
Cover Image
Format:
Image
The New Jersey Zinc Company office in Gilman, Colorado. The cinder block portion, which was the newer portion of the office, was constructed in approximately 1953. [license plate 1953]
Cover Image
Format:
Image
Sallie Enzenroth, Myra Squires Enzenroth Garnett, Elmer Ottens and Tom Garnett, at the Garnett home in Boulder, Colorado. Tom Garnett, Sir., Albert W. Enzenroth, and Victor Squires all worked for the New Jersey Zinc Co. Sallie Enzenroth is Tom Garnett's stepdaughter. Elmer was an electrician with New Jersey Zinc Co., first in New Jersy and then at Gilman, Colorado. He retired in 1988. He was married to Virginia Lewis, daughter of Pearl Henderson,...
Cover Image
Format:
Image
Dick Sayers (left) and John Skinner, examining ore in the ore cars. Both men are wearing headlamps.
Cover Image
Format:
Image
Elmer Ottens behind the wheel of his RV, visiting friends in Boulder, Colorado. Elmer was an electrician with the New Jersey Zinc Co., first in New Jersy and then at Gilman, Colorado. He retired in 1988. He was married to Virginia Lewis, daughter of Pearl Henderson, of Red Cliff.
Cover Image
36) Gilman
Format:
Image
Gilman from a vantage point across the Eagle River.
Cover Image
Format:
Image
Using a lift to move drums of chemicals in the Gilman mine.
Cover Image
38) Gilman
Format:
Image
Gilman from above U.S. Highway 24, showing entrance into the town. The main mine shaft is left of center in the photograph, with mine timbers stacked to the right of the shaft. The Eagle River and Eagle River Canyon are on the right.
Cover Image
Format:
Image
Road into Gilman with the Eagle River Canyon at far right. Main mine shaft is at left center with mine timbers stacked to its right. Housing in the background.
Cover Image
Format:
Image
The lathes were for working steel. They could straighten bent drill steel, put new ends on the rods and send them back for reuse. The Gilman shop reused as much equipment and supplies as was possible.