Belden, Colorado
Showing
21 - 40
of 65
, query time: 0.01s
Format:
Image
Service tram going from upper level, Gilman, to Belden in Eagle River Canyon. Cribbings visible, holding hillside in place. Train tracks in foreground.
[Title supplied from catalog prepared by the Eagle County Historical Society.]
22) Belden
Format:
Image
Facilities at Belden, some abandoned. Gilman is visible at the top of the cliff. Mine buildings are at right, midfield.
23) Repair shop
Format:
Image
More steel milling machiner in the repair shop. The lathe at center is approximately 20 feet long.
24) Zinc dryer
Format:
Image
The dryer building for zinc is at the far right. The zinc slurry would be heated and dried, leaving a very fine zinc powder. The powder was shipped in sealed box cars as it was so fine it would blow away in an open car. The rail line for shipping runs through the Eagle River Canyon (Belden area) so the final products for shipping were finished at this level.
Format:
Image
Ramond M. "Hap" Fletcher plowing snow after a slide at Belden in the winter. Fletcher was a heavy equipment operator for the New Jersey Zinc Co. The vehicle was tracked for better performance in the heavy snow in the Eagle Canyon near Belden.
26) Ore cart
Format:
Image
An ore car at right, going out to the main pit (Grizzly). Once it arrives at the pit, the rocker wheel on the cart is elevated by the track and dumps the contents of the cart into the pit.
27) Abandoned drift
Format:
Image
"All horizontal or subhorizontal development openings made in a mine have the generic name of drift. These are simply tunnels made in the rock, with a size and shape depending on their use—for example, haulage, ventilation, or exploration." -- Encyclopedia Brittannica
This drift is at the 16 level in the Gilman mine and has been abandoned. Water dripping through the ceiling carries minerals, forming stalagtites and stalagmites.
Format:
Image
Belden as seen from Gilman. On the left are the loading tippel, steam room and dryer. Loading tippel is extended over the railroad cars to be filled with ore. A surface tram carrying ore ready for loading is visible behind the loading tippel.
Format:
Image
Supply warehouse at Belden. Supplies came by rail through the Eagle River canyon and went into this warehouse. Robert E. Riggle worked here.
Format:
Image
At right is the ball mill. At left is the rod mill. The mills are on an incline for gravity feed down to the loading docks.
At the center right of the photo, steel rods are stacked for use in the rod mill.
33) Surface tram
Format:
Image
The surface tram from Belden to the top of the mine complex at Gilman during a tour of the Gilman mine. The Grass Mountain Nightrider Snowmobile Club organized the tour. Durbin McIlnay would have been mine superintendent at that time.
There are 28 photos in this series taken by Bob Riggle, the only color series of which I'm aware. Should you question the captions or have further information, please let us know.
Format:
Image
Men jockeying the new dryer from the flatbed rail car to the dryer building.
Format:
Image
The Belden facility showing the loading and processing facilities. Railroad cars waiting to be loaded are in the background. Directly above them are some of the old mines started in the late 1800s. The photo was taken from the dump at Gilman, looking down on Belden.
Format:
Image
Derailed railroad cars at Belden in the winter, circa 1951. The Eagle River is in the center of the photo.
39) Derailment
Format:
Image
Rail cars knocked off the tracks in the winter, circa 1951-52 at Belden. Other cars are lined up in the background awating loading. The dryer is the large building behind the railroad cars.
Format:
Image
A surface tram used to move ore and equipment is on the left coming into Belden from Gilman at the top. Loading tippel, steam room and the dryer buildings are pictured in the lower right.
