Gilman, Colorado
Showing
41 - 48
of 48
, query time: 0.01s
41) Rebuilt mine car
Format:
Image
O.A. McClain and Roy Long standing beside a completely rebuilt mine car at the Gilman Mine. An "eye" is seen with chains attached at the bottom of the cart. The eye was used to hook the mine cars together in a series of small trains for hauling ore.
Format:
Image
Flotation area for the zinc ore. Water valves are shown at the bottom of the table.
44) Flotation area
Format:
Image
Floation area for the zinc ore at Gilman. Flotation tables were used to seperate the zinc and lead from the waste in the mining process. Further processing separated the lead and the zinc.
Format:
Image
Flotation stations in the zinc section of the mill at Gilman. The flotation stations were part of the process of refining the zinc ore.
46) Mucking machine
Format:
Image
A compressed air-driven mucking machine at Gilman. The bucket has just been dumped into the ore car behind and is preparing to recover and pick up another load of ore.
Format:
Image
Belden as seen from Gilman. On the left are the loading tippel, steam room and dryer. Loading tippel is extended over the railroad cars to be filled with ore. A surface tram carrying ore ready for loading is visible behind the loading tippel.
Format:
Image
Dick Sayers (l) and John Skinner (r) at the pumping station on 20 level at Gilman.
"Water for the mine came directly from the Eagle River from the pump house, which was just across the ramp coming down the mill incline. About 50 tons of ore per hour went through the mill during each eight-hour shift." Eagle River Valley, p.38
