Belden, Colorado
Showing
81 - 86
of 86
, query time: 0.01s
81) Mantrip
Format:
Image
Loading up for transportation to lower levels in the mine. The 16-10 incline goes down to the 18 level (at one time it went all the way to the 24 level). Transporting people was called a mantrip.
In the front seat are Terry Pierson, Ella and Pete Burnett. Victor Pierson is standing at left in the yellow helmet.
82) Cap Lamp Room
Format:
Image
From left, Bill Burnett, Hawkeye (Gordon) Flaherty, and Ella Burnett are standing in front of cap lamp units at 16 level in the Gilman mine. Alberta Limatta is at far right.
The shaft house had a 2 cage lift system, taking miners between levels. It could work with one cage going up and the other down, or with just one isolated cage moving. Cap lamps were put on before going into the mine and returned upon coming out.
Format:
Image
Team installing a new dryer at the New Jersey Zinc Co. facilities at Belden.
From Left: Don Ginther, Lynn Walker, [unknown], Homer Sultzer, Buck Hickman, Forrest Witthauer. [Courtesy of Theodore Beck]
Format:
Image
Harold Steinmeyer (left) and Bill May in the compressor room at Belden. Prior to the electrical power plant at Gilman, much of the electricity for the mine (compressors) was supplied by the use of Pelton wheels (turbines) powered by the water from Fall Creek at Belden.
Format:
Image
Drills and lathes in the repair area. Welders and machinists were employed by New Jersey Zinc to maintain and recycle equipment. During the 1950s, there were three shifts working each day to maintain production levels.
Format:
Image
Conveyor unloading zinc from the dryer at Belden. The zinc was then taken to the loading tippel to be loaded on railcars. Durbin McIlnay is monitoring the process.
