Mine equipment
Showing
101 - 107
of 107
, query time: 0.01s
Format:
Image
Moving a dryer section into place by blocking and chaining. Small sections pf pipe were also used to move the dryer.
Format:
Image
Section of the zinc dryer being fitted into place at Belden. Chains and blocks are used to move the equipment into the building.
Format:
Image
Joel Fitzgerald, shop foreman, boring a bearing for an electric motor which operates Marcy Mill in the Milling Department.
Format:
Image
Emmet Flaherty preparing to pre-heat two blank pieces of hollow drill steel. In the background is an automatic oil-fired forge which will bring these blanks to an exact temperature for forging. From the hollow drill blanks, finished pieces of lugged steel are formed for use in rock drills.
Format:
Image
Bill Burnett squares up a frame prior to welding it at the Gilman mine. "C" clamps hold the frame in place. A welder's mask and ball peen hammer are to Bill's right. Suction vent hanging at far right.
106) Drills and lathes
Format:
Image
Drills and lathes in the repair area. Welders and machinists were employed by New Jersey Zinc to maintain and recycle equipment. During the 1950s, there were three shifts working each day to maintain production levels.
Format:
Image
Conveyor unloading zinc from the dryer at Belden. The zinc was then taken to the loading tippel to be loaded on railcars. Durbin McIlnay is monitoring the process.
